Customer Reviews

Overall rating: 4.7 / 5 from 3800 reviews.

Customer photo review of KEMIMOTO Upgraded Soft Doors for CFMOTO UFORCE 1000 with Straight YKK Zippers

At around $190, these soft doors are definitely an investment, but the quality is impressive. The materials feel durable, the zippers operate smoothly, and everything fits well once installed. Installation was straightforward and didn't take long. The enclosure does a good job sealing up the cab to help keep out wind and the elements while still allowing you to roll the windows down when you want more airflow. The fit around the mirrors and windshield is also well thought out, giving the doors a clean, secure appearance. While I do think the price is on the high side, the quality matches the cost. If you spend a lot of time in your UTV during cold or rainy , these doors are a worthwhile upgrade that provides comfort and protection without a complicated installation.

KEMIMOTO Upgraded Soft Doors for CFMOTO UFORCE 1000 with Straight YKK Zippers

Customer photo review of Fabric Rear Panel with Open Window for Pioneer 700 / 700-4

It was obvious that this item has been diligently and carefully crafted to fit the Pioneer 700 perfectly. Installation took less than 10 minutes. I really appreciated that every Velcro strap/tie-down seemed to be made of heavy-duty material and was in the exact position necessary to fit perfectly on the various corners and tubing of the Pioneer’s framework. Considering the length of it at first I thought it was going to interfere with the 2 hooks that attach to the tilt bed, but no, it fit nicely around them and didn’t obstruct the hooks or raising/lowering of the bed in any way. I especially liked the section that goes around the top of the frame, it’s zippered for a quick and easy on/off installation. Another nice touch is that the window itself also has a zipper to open/close it whenever I want. At my Pioneer’s max speed of 45mph I haven’t experienced any issues, it stays firmly in place, no excessive flapping/noise, no coming apart/loose or otherwise (with window closed) and has completely eliminated the horrendous wind draft coming in from the back that I had before. I’m very happy with this windscreen, I think it’s a quality made product and believe it will stand the test of time, definitely recommended!

Fabric Rear Panel with Open Window for Pioneer 700 / 700-4

Customer photo review of UTV Soft Cab Enclosure for RZR 570/Trail 570/800/S 800/900

I’m happy with these. I’m pretty happy with these doors. They definitely block the wind. There could be some improvements though. The biggest change I think would be adding double zippers so you can partially open the window and still have the bottom part shut. I’d also have more Velcro across the bottom so there is no gap near the zipper. I also broke one of the plastic Velcro strap fasteners when pulling it tight so don’t pull too hard. Overall these doors are good for the money. These do fit model year 2013

UTV Soft Cab Enclosure for RZR 570/Trail 570/800/S 800/900

Customer photo review of Side Mirrors with Spring Back Feature for Polaris General 1000 / XP 1000 / 4 1000 (2016–2026)

Awesome Quality! Great features! They look very stylish on the UTV! The installation took about 20 minutes for both sides. This kit even came with the tools to install them. The size of the mirrors for the UTV fit perfectly and makes the UTV look sharp! If you are traveling through tight areas/terrain or bushes, these mirrors will pivot out of the way them spring back into place. You can manually adjust the mirrors for the fit, and fine tune the mirror inside its frame. I love these mirrors! They are incredible!

Side Mirrors with Spring Back Feature for Polaris General 1000 / XP 1000 / 4 1000 (2016–2026)

Customer video review of KEMIMOTO 5" UTV Universal Fit Seat Cushion for Smaller Riders

I ordered this seat to be able to give my grandchildren a better experience in my UTV. They already love riding in it with "pappy" but they can't really see anything. This seat will give them the ability to see more of what is going on outside the machine as well as inside. It is made with good quality products and manufacturered with the quality I have been able to rely on from Kemimoto. The seat is firm enough to keep the kids supported but not like they are sitting on a rock or piece of metal. The covers are really good quality and thick but still able to removed and washed. The included strap lets you lock the seat down to the machine's seats so there is no worries of it sliding off or tipping over. The seat has two mesh pockets for a few small objects like pacifiers (binkis), phone, toy, etc. I think it's worth the price just so the kids get to experience nature and the views with me.

KEMIMOTO 5" UTV Universal Fit Seat Cushion for Smaller Riders

Customer photo review of 20L Motorcycle Hardshell Expandable Backpack

This thing is amazing. He was like a little kid at Christmas ! Checking out every inch of it and of course had to take it for a ride !! It was a gift he really loved

20L Motorcycle Hardshell Expandable Backpack

Customer photo review of 3-in-1 Flip Windshield For Kawasaki Mule PRO-MX 2019+

If you're looking for more wind, dust, rain, mud, and trail debris protection on your Kawasaki Mule PRO-MX then consider this KEMIMOTO flip windshield as a nice upgrade. I appreciate how the 3-in-1 style lets you run it fully open, vented, or closed based on weather conditions or how much air flow you want. The hard coated polycarbonate feels like a durable option that can stand up to normal trail abuse better than regular plastic. I also like how the seals help reduce rattling, wind noise, and dust in the cab. Installation should be simple thanks to the hardware included and rubber strips pre- installed but I would take your time to ensure everything lines up and is tightened down correctly. This is a decent windshield for the Mule PRO-MX that helps make your ride more enjoyable in varying conditions.

3-in-1 Flip Windshield For Kawasaki Mule PRO-MX 2019+

Customer photo review of Heated Winter Motorcycle Riding Gloves  Gear with Magnetic Quick-Release Power Cable

I ordered these for my son to use on his four wheeler this winter. These are built very well and fit perfectly. The size large fits just as I expected. The gloves feature two separate heating zones that are controlled independently. The controls are easy to operate. A long press on the button for each zone will turn it on and light up the button. Quick presses of the button will cycle through the heat modes. Red for high, blue for medium and green for low. These offer a lot of protection with the hard plastic area around the knuckles and the extended cuffs. Despite the bits of rubber and plastic "armor" scattered around, they are very comfortable to wear. I did a full 100% to 0% high heat mode, both zones battery test and I was very impressed. I used my wife's dual probe meat thermometer to measure temperatures throughout the test. I had the probes in the index fingers of each glove. At the start both gloves were right at 70°F. At 5 minutes in they were both near 100°F. At 30 minutes they were around 120°F. They seemed to hold that 120°F until the around the 3 hour mark when the batteries were just about dead. At 3 hours and 22 minutes, both batteries were finally dead. By the time the batteries died, the gloves were still at 100°F. With this kind of battery life, if you used them a little more conservatively - low or medium or only one heat zone - they could possibly last all day. That's some awesome battery life. The batteries are also made really well. They are solid and charge via USB C. There are four battery life indicator lights that come on when you push the little button on the side of the battery. All of that battery stuff is awesome, but the best part is that you may not need any of it. These come with a fused wiring harness to wire directly into your machine to power the gloves while simultaneously charging the batteries! The wiring harness has two magnetic ends that snap right into place on the gloves to power them, and since they're only attached to the glove magnetically, they'll pop right off if you need to jump off the machine quickly. Compared to the cheaper gloves he used last year, these are well worth the upgrade.

Heated Winter Motorcycle Riding Gloves Gear with Magnetic Quick-Release Power Cable

Customer photo review of Motorcycle Universal Adjustable Windshield

I am so happy with the windshield extension and can immediately tell the build quality is superb with quality parts. Holds the windshield at the angle I choose and it stays there. Even at highway speeds and then some. 😉 I bought the "cheaper" version before and was so disappointed with it as it is useless at highway speeds and started rusting within a week. You will not be disappointed with Kemi Moto.

Motorcycle Universal Adjustable Windshield

Customer photo review of UTV Overhead Cooling Fan with Lights for Polaris Can-Am 53-37 Inch Roof Width

The unit is very well constructed, but slightly too long for my 2025 Polaris Rzr. I had to do some modifications to the bracket to make it work. I notified Kemi Moto with a detailed video of the issue to prevent issues for other Rzr owners. It works well, and I like it. RonD Nova Scotia Canada

UTV Overhead Cooling Fan with Lights for Polaris Can-Am 53-37 Inch Roof Width

Customer photo review of 12V Electric Windshield Wiper Kit 16" for most UTV

Works perfect with my Polaris Ranger 570 SP Premium w/ a Poly Windshield. You will need to cut the motor female plug and simply add butt connectors to spare 16gauge wire (from any auto parts store) and then leverage the Polaris bus connection under the hood using a pigtail that can be purchased from Amazon. See pics. Follow the instructions for filling holes and mounting and works great. Excellent quality

12V Electric Windshield Wiper Kit 16" for most UTV

Customer photo review of UTV Turn Signal Kit with 110D Horn for Polaris, Can-Am, Kawasaki, CFMOTO

I have purchased products from Kemimoto in the past and was always satisfied with their stuff, this has been no exception and believe this is a well done kit for ATV/UTV's that do not come equipped with blinker and horn, it makes traveling roads easier. All the plugs appear to be waterproof connections, the signal lights are a twist connect type and make it easy to setup and install. The wiring has a good sheath on it and comes with protective sheaths for the places it's important. I like that the signal lights are not overly large, so it will be more discreet and won't ruin the look of your sporty ride with something that looks like its industrial or meant for a tractor. The horn is loud enough considering it's for off-road vehicles, it will get someone's attention. I tested everything outside of installing and all appears to work great. The switches are a good size for the thumb and work great. The system has it's protective measure of having an inline fuse that is replaceable. Install of course will take a little time to make it nice and proper, there is plenty of wire to secure and things to install, but they have include zip ties if you would like to use them, everything will depend on what model or style of bike you have and if you need to remove anything to access what is needed, so a little patience :) Overall, I think this is a good universal kit, looks like quality to me and really you could install on anything you wanted depending on your needs. I would recommend this product. 👍

UTV Turn Signal Kit with 110D Horn for Polaris, Can-Am, Kawasaki, CFMOTO

Customer photo review of Universal Turn Signal Kit with Turn Switch & 105D Horn

Very Awesome Happy Customer plug & play install on a 2007 Yamaha Rhino. I purchased two other kits and sent back poor quality tried this one great price for all you get and I’m a happy camper. Installation very simple and easy hardest Part would be running cable in between under space and zip tying any extra loose cable

Universal Turn Signal Kit with Turn Switch & 105D Horn